Re: reviving an Apple IIGS...

[Krishna Sadasivam <kms007@gmail.com>]

Powered up the IIGS and now I'm seeing the following error $0201: RAM
Disk Full or Not Enough Memory. I have a 4MB Harris SIMMs card and a
RamFAST SCSI card rev E. Not sure what to further troubleshoot....

-K


On Jul 13, 8:12 pm, Krishna  Sadasivam <kms...@gmail.com> wrote:
> It's been many, many moons since I last powered up my Apple IIGS (12
> years to be exact). I used to frequent comp.sys.apple2 back in the
> heyday of Usenet - but since life got in the way, and I put the IIGS
> in storage.
>
> Until now.
>
> I have brought my IIGS out of retirement (it's a Woz edition ROM1 with
> 4MB of RAM, ZipGS 8MHz 32K cache and a Second Sight VGA board. I
> connected the IIGS up to a VGA LCD display and was able to see the
> power-up screen. However, I don't have any IIGS software with me, and
> the SCSI (80Meg) hard drive that was also tucked away in storage
> appears to no longer work.
>
> I'm thinking about getting a CFFA card that'll boot into System 6.0.1,
> but haven't yet made the plunge.
>
> Looking forward to reconnecting with fellow Apple II users. It's been
> a long time, and I'm glad to be back.