[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Apple IIGS motherboard in an Apple IIe case



On Mar 14, 6:54 am, "Polymorph" <polymorp...@hotmail.com> wrote:
> On Mar 14, 10:13 pm, demp...@actrix.gen.nz (David Empson) wrote:
>
> > Polymorph <polymorp...@hotmail.com> wrote:
>
> -snip-
>
> > It is not possible. The ROM 3 IIgs has removed all of the hardware
> > support for a IIe keyboard. You would have a dud built-in keyboard and
> > would require an ADB keyboard.
>
> I suspected as much...
>
> > In the ROM 00/01 IIgs, it is a function of the keyboard microcontroller
> > (which also controls the ADB). The IIe keyboard has one other
> > limitation: even in a later model IIe with built-in numeric keypad, IIgs
> > software which is aware of the numeric keypad can't distinguish it from
> > the main keyboard, so some special functions that use the numeric keypad
> > won't work.
>
> I haven't come across this limitation yet, but as mine is used
> primarily for my daughters games, it is not surprising. Thanks for the
> info though.
>
> > If you want to use a IIe mouse card, the ROM 3 won't support it in
> > 16-bit software (it requires an ADB mouse) but it would work with 8-bit
> > software.
>
> I would recommend using an ADB mouse any how, if only to free up an
> additional slot (and use less power?).
>
> > I don't know if the mounting positions differ, but you need a different
> > baseplate to install a ROM 00/01 motherboard in a IIe anyway (the
> > connectors on the back are different), unless you do a fair amount of
> > drilling and cutting.
>
> The IIgs motherboard does require you add mounting brackets onto the
> baseplate in different positions to the //e motherboard. As for the
> back, I cut out the required section of the baseplate to accommodate
> the IIgs connectors, and drilled two 10mm holes for the composite
> video and ADB mouse sockets.
>
> cheers,
> -p

Greetings,

Thanks for all the advice about this. I'm sure I'll have more
questions after I get the motherboard. As I said before at the moment
I'm not too worried about using it as a GS, my main thought was being
able to use an Apple 3.5 drive to play games such as Silvern Castle
and Destination Mars! on real Apple II hardware versus an emulator. I
do have an Apple IIc that I also got through Ebay but it needs some
work before it will run. I've also noticed that the Unidisk 3.5 seems
rather scarce and hard to find compared to the Apple 3.5, which the
IIGS can use but not the IIc.

Thanks again,
Dean