Re: Franklin Ace 1200 -odd little jumper

[Andrew James Alan Welty <andrew@cci-29palms.com>]

>> The schematics that I have are difficult to read (I'm not an electrical
>> engineer.) Rather than having one whole schematic that shows the physical
>> layout of the board, the schematics are broken down like this:
>> 
>> -Main Board Logic
>> -Memory Array
>> -Video IO
>> -Color Card Logic
>> 
>> As near as I can tell, the schematics show how things are connected, but
>> they don't show where things are on the board. For example, on the
>> schematic, the Power Connector is directly behind what I think are the Card
>> Slots, and the CPU is directly to the right of those slots. It isn't layed
>> out on the schematic the way it is on the board. I don't see much that I can
>> identify between the schematic and the actual board. For example, what is a
>> JZA6 Interface, and where is that on the board? Its very confusing.

> 
> Is it possible to scan the schematics and make them available for
> examination?  Perhaps a process of elimination will allow us to
> correspond the gates in question with the schematic.

I've got the schematics and could scan them in.

I have:

Main Board Logic
- Memory Array
- Video I/O

Color Card Logics
ACE 80 CPU Board
Display Card Logic
Ace Dual Interface Card