Re: ProTERM 3.1 to PC via Hyperterminal

["Laine Houghton" <laine@intergate.com>]

"Ed Eastman" <noone@nowhere.net> wrote in message
news:cke0ni$pmh$1@unlnews.unl.edu...
> Would you mind specifying the switch and corrective setting so it may be
> added to the FAQ?
>
> Thankx,
> Ed
>
>
> Kellion wrote:
> >I have used proterm 2.1 to talk between a apple2gs and a win 2000 comp.
>>You obviously have the cables set up right.. but my machine did not work
>>properly unless hyperterm was set up to use software handshaking.
>>FINALLY figured out what the problem was.  I had the Super Serial Card
>>settings set to exactly what the ADT documentation listed.  The
>>documentation for when I was creating a Apple // disk image for ADT from
>>the PC.  One of the dip switches needed to be turned on which would allow
>>interrupts.  Works perfectly now with hardware handshaking. = )


SW2-6   ON Enable interrupts
              OFF Disable interrupts

Proterm 3.x requires SW2-6 be set to ON.