Re: Ok, where does it all go?

[Charles <spammeister12345@aol.com>]

In article <2r4241F15ioceU1@uni-berlin.de>, tolsen64@hotmail.com says...
> >
> > I don't know where this stuff goes.
> >
> > Apple Rev C SCSI card (with Apple CD 600e)
> This could go in slot 1 since you don't have a printer card.
> 
I intend to use a printer from the port.  Can I have both?  I don't 
think so.  Any other ideas given the slot assignments below?  Any better 
scheme?

> > Apple Superdrive controller card (with Apple 3.5 1.44k superdrive)
> Slot 5 (disabling the smartport?)
> 
Ok, but.... (see superdrive discussion below)

> > LanceGS
> You don't need this.  Send it to me.
> 
:-p  Sorry, but that's not happening.  I actually wanna play with this 
one :)  Ok, so where is the best slot for it?  #2 (MYCARD)?

> > Rev 1.02 ZIPGSx
> This is made to fit in Slot 3, though I don't think it actually needs to be 
> in a slot.  It is powered from the CPU socket.
> 
Ok, so I can put this in a slot but NOT set that slot to MYCARD and it 
will still work properly?

> > CFFA card with 512mb CF card
> Slot 7 (Boot from this puppy)
> 
This I do now :)  Thanks.

> > Super Serial Card
> Not needed in a IIgs.
> 
Yeah, I know, but when you can't get ADT working normally...  Perhaps to 
be replaced by the LanceGS...

> > I have 2 Apple 3.5" 800k drives daisychained to 2 Apple 5.25"
> These would plug into the smartport on the back of the computer.  But if 
> you're using the SuperDrive card, I don't know whether you can plug the 
> 5.25's into the Superdrives or not...
> 
> 
The big question here is can I use the superdrive and at least 1 3.5 and 
1 5.25 drive as well?

> >
> >
> > I know this:
> >
> > RAM SLOT Ram-4-GS
> > Slot 7 CFFA card - to boot from the CF Card (set to MYCARD)
> >
> > But the rest is fuzzy.
> >
> > Anyone wanna help? 
> 
> 
>