Re: Long VTech Floppy Drive Controller

["Bill Garber" <willy46pa@comcast.net>]

"Wayne Stewart" <waynes@telus.dotnet> wrote in message
news:kqy3c.142812$A12.82386@edtnps84...
: Bill Garber wrote:
:
: > I need to have my SCSI card in slot 5 otherwise the
: > partitions don't get remapped to slot 2. Do they get
: > remapped from slot 7 as well?
:
: It does with ProDOS 2.0.3. I have a marked preference for that
: version. Installed a 65C02 in my II+ so I could use ProDOS
2.0.3.
: If you are booting from slot 5 on a IIe then it might be
: worthwhile patching the ROM so the IIe'll scan the slots
: starting at the bottom and going up.

That would certainly solve the issue, but
then I would have to leave out my Slinky
Ram card that is in slot 1. I guess I need
to go through all my disks and see what will
run under 2.0.3 and put it on them. Yes, if
I put that on with A2Desktop, then it will
map partitions 3 and 4 to slot 2 while it's
in slot 7, and if I want to boot from floppy,
then control-reset before it's loaded or hit
startup drive after it's loaded. Yeah, I'll
put 2.0.3 on it and move it to 7. Now, what
about my VTech card? I can use the Laser ROM
in it? And how about cables? Anything on that
yet?

Bill @ GarberStreet Enterprizez };-)
Web Site - http://garberstreet.netfirms.com
Email - willy4SPAM6pa@comXcast.net
Remove - SPAM and X to contact me



---
This email ain't infected, dude!

Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.593 / Virus Database: 376 - Release Date: 2/24/04