Re: Getting ap2222pc on the Apple II

["MechCD" <mechcd@bluebottle.com>]

Ok, the connections were all correct. I unhooked the interface and attached
my trusty joystick and fired up Choplifter. Now when i hit the main fire
button, it restarts with grabled stuff all over the screen. If I hold it
down, it restarts over and over, the power supply clicks, and the power LED
(not light) flashes.

Whats my chances of blowing something without trying? This was my functional
Apple IIe... I have another, but a good portion of the keys don't work and
i'm not sure how much of it works overall.

----- Original Message ----- 
From: "MechCD" <mechcd@bluebottle.com>
Newsgroups: comp.sys.apple2
Sent: Sunday, February 29, 2004 4:24 PM
Subject: Re: Getting ap222pc on the Applle II


> I'll try and check the connections again. I'm fairly certain the PC's port
> works, I used to it print not long ago. How would I verify the contents of
> the memory on the A2? Type in the addresses by themselves (0300 for
> example)? I'll try my low quality o-scope on it if i can get it close
enough
> for the leads to reach.
>
> "Hans Otten" <nobody@yahoo.com> wrote in message