Re: musing about building a minimalist Apple ][+ clone

["Vince Briel" <vbrielnospamme@comcast.net>]

If your going to use Eagle there are 65XX lib files out there, if you need
them, let me know.

Vince

--
Replica I
The Apple I clone

http://www.applefritter.com/apple1/members/replica1/index.htm
"Bill Garber" <willy46pa@comcast.net> wrote in message
3PSdncRRMKSoKqLdRVn-vw@comcast.com">news:3PSdncRRMKSoKqLdRVn-vw@comcast.com...
>
> "Bill Garber" <willy46pa@comcast.net> wrote in message
> I8KdndSlJ_L9KKLdRVn-hg@comcast.com">news:I8KdndSlJ_L9KKLdRVn-hg@comcast.com...
> :
> : "Laine Houghton" <laine@intergate.com> wrote in message
> : 103vbu82tp0tf08@corp.supernews.com">news:103vbu82tp0tf08@corp.supernews.com...
> : :
> : : "Bill Garber" <willy46pa@comcast.net> wrote in message
> : : G4CdnSaLjsCC_KLd4p2dnA@comcast.com">news:G4CdnSaLjsCC_KLd4p2dnA@comcast.com...
> : : >
> : : > "Vince Briel" <vbrielnospamme@comcast.net> wrote in message
> : : > news:NQG%b.133449$uV3.652853@attbi_s51...
> : : > :
> : : > : > Eagle it great. There were some mentioned in
> : : > : > A.B.S.E, but I can't find them in the posts
> : : > : > now. I may need to go to the archive or ask
> : : > : > them to post them again. How small of a board
> : : > : > is free?
> : : > :
> : : > : 2 X 2.5" IIRC. What I did was use eagle for the schematic
> : : > software (No real
> : : > : size limit) and express pcb for my layout. I had no way
> to
> : : > transfer over but
> : : > : eagle gave me the layout schematic instead of writing it
> on
> : : > paper. When your
> : : > : on a budget, you do what it takes to get the job done.
> : : >
> : : > Hahahahahaha! ExpressSCH is included in the package.
> : : > Once you build the schematic, you can then place your
> : : > components on the layout, link the SCH to the PCB and
> : : > click, using NetFind, any pin on the PCB and it shows
> : : > you where they go to. Took me a while to learn the
> : : > whole package, but once familiar I can throw a drawing
> : : > and PCB together in a matter of hours. I also discovered
> : : > that I can place arcs in the corners so that the traces
> : : > are smooth continuous lines with no danger of them pulling
> : : > up at the sharp corners where they would be weak. Thanks
> : : > to a friend, I learned too that I can use all labels on
> : : > the schematic which makes for a very nice looking drawing.
> : : >
> : : > Bill @ GarberStreet Enterprizez };-)
> : :
> : :
> : : Max board size is  4" x 3.2"
> :
> : Where is the max that size???
>
> Never mind, I know now.
>
> Bill @ GarberStreet Enterprizez };-)
> Web Site - http://garberstreet.netfirms.com
> Email - willy4SPAM6pa@comXcast.net
> Remove - SPAM and X to contact me
>
>
>
> ---
> This email ain't infected, dude!
>
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.593 / Virus Database: 376 - Release Date: 2/21/04
>