Re: Help: 2 diyng GS?

[Wayne Stewart <waynes@telus.dotnet>]

jerome wrote:
> My father uses 2 GSes for  medical research data (as special soft was
> develloped for his work some 25 years ago). He used to work on #1
> (10Mhz Transwarp, 40Mo Vulcan HDD) and backup data on #2 (no
> accelerator, but SCSI controller and 300Mo SCSI HD.)
> However, since a week, he has big trouble:
>
> #1 boots fine, but after 1h begins to behave erratically and write
> garbage files to the HDD. He tried to disable the accelerator, but no
> success.
>
> #2 does not boot anymore from the SCSI HD, and, when booted from a
> floppy, the HD is not accessible. From the control panel, the
> controller in slot 2 is correctly set to "your card", and the external
> HD lights are on


I'd do some parts swapping to see if you can get one working right.
I'd try moving the memory expansion card from GS#2 to GS#1 and see if
that helps. If not then I'd move the Vulcan over to GS#2 and see if
that works.
Might help if you mention what city and country you're in. Might be
someone in your area that can help out in person.

Wayne