Re: Need 40 Pin DIL plug

[lemonherb1@netscape.net (Herbert Fung)]

tommage@aol.comNOSPAM (Tom) wrote in message news:<20030415081018.24248.00000326@mb-cs.aol.com>...
> The 40 pin DIL plug is used on the Transwarp card from Applied Engineering for
> the Apple IIgs."
> 
> Thanks,
> Tom

Just a word of advice. The pinouts on most of the 600mil 40pin DIP
connectors I've seen are actually reverse of the ones used on a
TransWarp.

If he's planning on making a replacement cable for his TransWarp, tell
him to make sure to have a continuity tester to make sure the pinouts
are the same as the old cable.

It's still possible to use the standard connector, but he'll have to
twist every pair of lines in the process.

Best of luck.