Re: Transwarp conflicting with Vulcan HD in 2e?

[waynes@telus.net (Wayne Stewart)]

Hal <res0zgmi@verizon.net> wrote in message news:<res0zgmi-7A370B.09443410042003@news.bellatlantic.net>...
> Anyone had the experience of a transwarp card conflicting with a vulcan 
> hard drive in a //e?
> 
> Specifically, I have a //e with a 40mb Vulcan that's working great. I 
> have a working Transwarp card that, when put into this //e, causes the 
> Vulcan to not be able to boot. When I try to directly boot (PR#7) from 
> it, I get a message that 'prodos can not boot from this drive'.
> 
> I've looked at the transwarp manual and tried adjusting the speed for 
> that slot, but it doesn't work at any setting. When I pull out the 
> transwarp, the vulcan works fine again.
> 
> I tried the transwarp in another //e and it works fine as well. No 
> problems with 5.25 or 3.5 drives.
> 
> Any ideas? Any info is appreciated.

I have a 40mb Vulcan in a IIe with a TransWarp and have no difficulty. 
Have you run the self test on the Transwarp? 
Also which ROM version is on the TransWarp?

Wayne