Re: Transwarp conflicting with Vulcan HD in 2e?

[Hal <res0zgmi@verizon.net>]

In article <6d4d71f5.0304101753.12b926de@posting.google.com>,
 waynes@telus.net (Wayne Stewart) wrote:

> Hal <res0zgmi@verizon.net> wrote in message 
> news:<res0zgmi-7A370B.09443410042003@news.bellatlantic.net>...
> > Anyone had the experience of a transwarp card conflicting with a vulcan 
> > hard drive in a //e?
> > 
> > Specifically, I have a //e with a 40mb Vulcan that's working great. I 
> > have a working Transwarp card that, when put into this //e, causes the 
> > Vulcan to not be able to boot. When I try to directly boot (PR#7) from 
> > it, I get a message that 'prodos can not boot from this drive'.
> > 
> > I've looked at the transwarp manual and tried adjusting the speed for 
> > that slot, but it doesn't work at any setting. When I pull out the 
> > transwarp, the vulcan works fine again.
> > 
> > I tried the transwarp in another //e and it works fine as well. No 
> > problems with 5.25 or 3.5 drives.
> > 
> > Any ideas? Any info is appreciated.
> 
> I have a 40mb Vulcan in a IIe with a TransWarp and have no difficulty. 
> Have you run the self test on the Transwarp? 
> Also which ROM version is on the TransWarp?
> 
> Wayne

Transwarp is ROM v.1.3. How do I run a self-test? Could you tell me what 
your dip switch settings are?

Thanks.