Re: Super Serial -> PC

[steve@dosius.zzn.com (Dosius)]

"GarberStreet Enterprises" <willy46pa@comcast.net> wrote in message news:<EDGdnbyKn_fmAMajXTWcqg@comcast.com>...
> Dosius <steve@dosius.zzn.com> wrote in message
> 9307085f.0302250802.21d01a00@posting.google.com">news:9307085f.0302250802.21d01a00@posting.google.com...
> > I have two PCs and an Apple //e.  The Apple //e has a Super Serial
> > Card in port 1 configured for an Imagewriter II printer.  I have no
> > documentation for the card.  I did buy a DB25F/DB25M null-modem cable
> > to connect to my Loser, er, Laser 486SX/25.
> >
> > Can anyone tell me how I should set it up so I can communicate ADT,
> > etc., over the line?
> >
> > BTW, I have Windoze 2.03 Terminal and AWKWARD (homebrew terminal
> > program) on the computer, and can easily connect both ways between my
> > 486SX/25 and my 486DX5/133, so the PC side is no issue.
> >
> > Thanks in advance.
> >
> 
> I believe I can help you.
> 
> First, set the jumper block so the arrow points up
> to modem.
> 
> Second set the jumpers as such.
> SW1 - s1 down or off, 2 + 3 off, 4 on, 5 + 6 off 7 on
> SW2 - s1 + 2 on 3, 4 + 5 off 6 on 7 off
> 
> This sets you up for 9600, no parity, 8 bit transfer.
> 
> Now hook up your cables and you're all set.
> 
> I assume you know how ADT works. If not let us know and
> we'll help you further.
> 
> --
> 
> Bill @ GarberStreet Enterprises
> http://garberstreet.netfirms.com
> 
> 
> 
> 
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.449 / Virus Database: 251 - Release Date: 1/27/03

Ok, thx.  I have the docs, so I think I can figure out how to use ADT ;)

-uso.