Re: How to configure serial port on //c+?

[Chris Merrill <chris@nowhere.net>]

On 10 Feb 2003 04:38:50 -0800, jon@i-manila.com (Jon Co) wrote:
>not sure about the //c+, but on a //c (with the unidisk rom...
>probably same with the original //c as well) the control codes for ssc
>would work just as well.  But since the //c (and //c+) dont have
>jumpers or dip switches, some values are poked into the auxiliary
>memory screen holes to take the place of the dip switches of a SSC. 
>If you have the systems utilities disk, boot it and set your baud rate
>and stop bits etc etc.  then you can boot DOS and do your thing.  the
>settings would survive almost any reset as long as you dont power down
>your computer.

Thanks,  I'll try getting a utility disk and setting the comm settings
that way.

Chris