[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: GS Memory Expansion

Subject: Re: GS Memory Expansion
From: "Bryan Villados" <news002@macgeek.org>
Date: Thu, 28 Nov 2002 23:01:58 GMT
Newsgroups: comp.sys.apple2
Organization: RoadRunner - West
References: <121791b5.0211281252.7f9fbae5@posting.google.com>
Xref: archiver1.google.com comp.sys.apple2:24889

The jumpers are needed to enable the RAM you've added to the card.

--- Bryan

"Paul H. Lee" <earnhardtfanpl@hotmail.com> wrote in message
121791b5.0211281252.7f9fbae5@posting.google.com">news:121791b5.0211281252.7f9fbae5@posting.google.com...
> I have two of these cards.  I recently added memory chips to each one
> to max them out at 1Mb each, but my GS doesn't see the ram on either
> of the cards.  Is there some jumper or dip I need to change so that
> the GS sees the extra 768K I've added?  I see two jumpers on the card
> marked J1 and J2, but I have no documentation at all on these.
> Thanks,
>
> Paul

References:
- GS Memory Expansion
  - From: earnhardtfanpl@hotmail.com (Paul H. Lee)

Prev by Date: Hardware-based Apple II emulation (was: ANNOUNCE - TrackSTAR PLUS write-up)
Next by Date: "hello" proggy on a dos 3.3 disk
Previous by thread: GS Memory Expansion
Next by thread: GS Memory Expansion
Index(es):
- Date
- Thread