Re: Help with ADT

[Romeo <boogiejr@hotmail.com>]

Doh! Shouldn't try to use my brain at the end of a crazy week like
this! my brain cells are all sleeping right now.

I just realized, you said you already dumped ADT to the IIGS. so it's
obviously not the terminal/modem jumper.

Here's another thing that may or may not help: I know you set up the
port settings in Hyperterminal, but just to be sure, I also made those
the default settings for the com port in the control panel -> system
properties -> device manager -> ports -> com1 (or whichever port
you're using) :             8,N,1 and 19200 bps

Romeo


On Fri, 08 Nov 2002 21:32:54 -0600, Romeo <boogiejr@hotmail.com>
wrote:

>I recently got back into using ADT to transfer .dsk images back to my
>IIgs, and got a similar error. It turned out, I had the
>"Terminal/Modem" jumper set wrong.
>
>If you're using a null modem cable, you should have the arrow on the
>jumper pointing to modem. If you're using a straight-through cable, it
>should be set to terminal.
>
>Oh, I don't know if it makes any difference, but I'm using an SSC 2.
>
>Romeo
>
>On Sun, 3 Nov 2002 01:08:28 -0500, "Greg Andrzejewski"
><pressyourluck85@yahoo.com> wrote:
>
>>Hello,
>>    I recently got a ROM 1 IIgs without any software. The DOS 3.3 and ADT
>>v1.21 dumps went fine with Hyperterminal and a Super Serial Card, but I
>>can't seem to get ADT to work. When I try to receive a disk image on the
>>IIgs using ATDwin, nothing happens once it says "Waiting for PC to reply."
>>The MS-DOS version performs similarly, execpt the PC says "00: Unknown
>>error" or somthing like that. Any ideas on what could be wrong? If not, are
>>there any other ways of getting Apple II disk images onto a floppy? Thanks.
>>