[CSA2] ADT-GS Problem (Question)

["Josef" <rummikub32@RTyahoo.com>]

Hello everyone,

     I've gone over the CSA2FAQ and ADT's readmes, and I cannot figure out
why this is happening:

In attempting to transfer disks between my PC (PIII-650, Win2K/PC-DOS 7,
ADT-1.22 and ADTw-1.22, standard serial ports) and my IIgs (ROM03, ZipGS
9Mhz/32k, 4MB RAM, 5.25 and 3.5" disk drives, ADTgs-v.91, and more), the
transfer locks, with ADT-GS apparently reading the first block of
information.  I've changed baud rates, serial ports on the PC, and even
null-modem cables (all of which work).

I've also tried the transfers with the ZipGS disabled, and the toggle for
Appletalk Delay set both ways.  The only thing I haven't done is pull out an
Apple IIe with an SSC, and do it that way (I'd rather not).

Has anyone else had this problem, or have I missed something completely
obvious to an outsider? *grin*

Thank you,
Josef

PS:  I have verified, using ProTerm and HyperTerminal, that the connection
works at all ProTerm-supported speeds between the two machines with any
cable I use.  These include the ones supported by all ADTs that I have.