Re: Making DSKs with ADT

[markREMOVE@syndicomm.com (Mark Percival)]

On Mon, 22 Apr 2002, "D. Snyder" <dsnyder66@enter.net> wrote:

>Thanks everyone. When I got the IIe 6 years ago, the SSC was in port 3. I've
>now moved it to 2. I was able to set the speed on the SSC to 300 baud.
>However, when I use HyperTerm to send the adt.dmp file, nothing happens. I'm
>sending it as a text file. I've changed all the switches on the card to what
>the ADT text file suggested. Any ideas? Should I use something other than
>HyperTerm (the one that comes with Win98 Second Edition). Thanks again

HyperTerminal will work fine.  The problem is likely in the cable you
are using.  The cable has to be either an A) serial null-modem cable
or B) standard PC modem cable.  With the latter make sure the jumper
block on your Super Serial Card is set to the "Terminal" posision.

Mark R. Percival - RTC Host - Syndicomm Online Apple II Forum
"Midweek Madness!" Every Wednesday Night : 7:00 PM - 9:00 PM Pacific Time

http://www.syndicomm.com