Re: Making DSKs with ADT

["D. Snyder" <dsnyder66@enter.net>]

Thanks guys! When I initially heard "Jumper" I was looking for a more
modern-ish kinda jumper. I didn't even notice the block which clearly had an
arrow pointing to "Modem" with "Terminal" on the opposite side. I've almost
got it all working. After I send the adt.dmp file the IIe beeps several
times after outputting just a \, pauses a second or so then beeps several
times again and outputs a \. I figured it might be something with the
Linefeeds. I can't find an option in HyperTerminal to "strip linefeeds on
output" though. I also tried setting the line delay to 1200ms thinking it
might be that. Same results. Thanks for your help. :)


"Mark Percival" <markREMOVE@syndicomm.com> wrote in message
3cc35f1c.47758601@news.videotron.ca">news:3cc35f1c.47758601@news.videotron.ca...
> HyperTerminal will work fine.  The problem is likely in the cable you
> are using.  The cable has to be either an A) serial null-modem cable
> or B) standard PC modem cable.  With the latter make sure the jumper
> block on your Super Serial Card is set to the "Terminal" posision.
>
> Mark R. Percival - RTC Host - Syndicomm Online Apple II Forum
> "Midweek Madness!" Every Wednesday Night : 7:00 PM - 9:00 PM Pacific Time
>
> http://www.syndicomm.com