Re: Booting problem with Altech Harddrive on IIGS ! -->Thanks!

["Deacon Blue" <scavenger@apexmail.com>]

Thanks for the tip!

I will certainly try to move the card to slot#2 and check if this helps, and
report back to the group

For the record the RAM-board used is marked 'Applied Engineering." with 6.5
MB added instead of the Apple-original board containing only 512 kb.

--> Currently occupying slot#2 is a Super Serial Card II intended for use
with ADT.  What would be the appropriate option for the card, slot#7 ?

best regards



Cturley2 <cturley2@aol.com> wrote in message
20000525174959.18393.00000183@ng-cg1.aol.com">news:20000525174959.18393.00000183@ng-cg1.aol.com...
> Try moving it to Slot 2 and specify 'My Card' in the control panel for
slots.
>
> I had the same problem with a Focus I had as such and that fixed it for me
just
> fine.  Something about Slot 7 and the Focus with that sized IDE HD just
seems
> to freak out on occasions.  But, moving it to Slot 2 with the control
panel set
> as mentioned above seems to always fix the problem for me with the Focus
340MB
> or larger sized HD.
>
> Hope that helps fix your problem with it also.
>
> Cheers,
> Tom