Re: Really Dumb question.

["Patricia D. Glenn" <patglenn@ix.netcom.com>]

It's in slot 7, and yes, that's what it's set at.  It's an old Apple SCSI Rev. B
card, but it worked before.  Yes, I installed the drivers, both on the drive and on
disk.  I can write and read it, but not boot from it.  I'm almost positive it's
something obvious that I'm missing.

Pat

LJSILICON wrote:

> Do you have the boot slot set to the one containing your hard drive controller
> card? What type of controller are you using? If it's a RAMFast you need to hold
> down Open-Apple-0 when you boot. This will let you set the boot partitions.
> Also, if you are using an Apple SCSI card, did you install the SCSI drivers?
>
> LJSilicon
>
> http://members.aol.com/ljsilicon/plain.html