[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Color monitor with ][ Europlus
- Subject: Re: Color monitor with ][ Europlus
- From: adrianw@cassius.ee.usyd.EDU.AU (Adrian Whichello)
- Date: 1996/07/10
- Distribution: inet
- Newsgroups: comp.sys.apple2
- Organization: Department of Electrical Engineering, Sydney University
- References: <4rtp7v$32f@apoll.informatik.uni-bonn.de> <4rus4r$5j1@wraith.cs.uow.edu.au> <4s0s5d$8bo@apoll.informatik.uni-bonn.de>
In article <4s0s5d$8bo@apoll.informatik.uni-bonn.de>,
Roland Schregle <schregle@Saturn> wrote:
>
>Does that mean that the original plus (without eurapple modification)
>produces an NTSC color output, but the europlus (with mod) requires an
>additional card for PAL color output! WHAT A RIP-OFF!!! (At least back
>then!)
>
>
>GanjaTron
Yep, sure was. And the PAL colour was very "washed out" compared to the NTSC
version (my brother had a tristandard TV and went to a lot of trouble to
convert his europlus to the original 2+ frequency to produce a true NTSC
signal, so I've seen both). But, to be fair, PAL signals (for television, not
simple computer graphics) are better and thus a bit more complicated to produce
than Never Twice Same Colour.
Adrian Whichello Phone: +61 2 351 4824
Imaging Science and Engineering Laboratory Home: +61 47 588 319
Sydney University Electrical Engineering Fax: +61 2 351 3847
Australia Email: adrianw@ee.usyd.edu.au
"I wish to God these calculations had been executed by steam!" - C. Babbage