Re: System Saver IIgs: Can it be opened?

[butch@netcom.com (Gabe Sanchez)]

Leslie M. Barstow III (wdphoenix@delphi.com) wrote:
: Okay, I have the same problem with mine, and have been following this
: thread with interest...
:  
: HOW DO YOU GET THE BLINKING THING OPEN!!!!!!!

Well you have not been reading too carefully....There are some screwes that
you need to remove that are hidden under the foam around the edges of the
systemmsaver :) There should be about 2 per side so that would be 8 screws
that you need to remove that are under the foam. Just fell for them and you 
will find them, is not that hard :) Once you have all the screwes off then 
the lid shuold pop open quie easly. If it does not see which side is giving
you trouble and then check to see if you missed a crewed on that side.
Hope this helps ya :)
Gabe

-- 
  ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
  :: Mr.Butch Sysop of The Micro Exchange     :: o RamFast Speed          ::
  :: 714-992-4520  2400 - 28.8k Dual Standard :: o 15 Mhz 64 Cache Zip GS :: 
  ::                                          :: o Internet               ::
  ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::