Re: System Saver IIgs: Can it be opened?

[Tom O'Neill <tdon@delphi.com>]

Gabe Sanchez <butch@netcom.com> writes:
 
>Well you have not been reading too carefully....There are some screwes that
>you need to remove that are hidden under the foam around the edges of the
>systemmsaver :) There should be about 2 per side so that would be 8 screws
>that you need to remove that are under the foam. Just fell for them and you 
 
Hmmm, mine has *three on each of two sides, none along the front edge and
none along the rear edge.  They're at each of the corners and in the middle
..and once you have them out, it comes apart easily.  Don't force it!