Re: SCSI termination questions

[behrenss@Informatik.TU-Muenchen.DE (Soenke Behrens)]

cxdb14@wsuhub.uc.twsu.edu (RANDY) writes:

>I need to know how to hook up multiple devices to both a rev C and a high
>speed SCSI card. Do I need terminators on both drives, or just on the last
>one? The rev C and the high speed are different is this respect are they
>not? Anyone out there set me straight on this?

Terminators have to be on the last device in the chain and on the card. If
the card has no terminators, and the cable from the card to the first drive is
fairly short, and you have termination problems, try setting terminators on
the first device in the chain, too.

>Also, what do the set of molex pins on the rev C do?

They set the card's ID. Check your manual as to how that is encoded (I'd
guess, though, that there are 3 pairs of pins which represent a binary number
that is the ID).

Soenke
-- 
===========================================================================
More than silver, more than gold, I need   !    behrenss@informatik.
electricity. I need it for my dreams.      !    tu-muenchen.de
(RACTER)                                   !  FIDO: 2:246/13 Soenke Behrens