Re: ADTPro problem - non-SSC serial cards supported?

[schmidtd <schmidtd@my-deja.com>]

On Sep 9, 3:39 am, j...@magrathea.plus.com (Jim) wrote:
> schmidtd <schmi...@my-deja.com> wrote:
> > > Sorry about that.  One thing I just discovered: your 7710 is closely
> > > related to Apple's original comms card.  That means you will likely be
> > > able to use Paul Schlyter's adaptation of the original ADT to use your
> > > card.  See:http://prdownload.berlios.de/adt/ADT_2007_2.zip
> > > and after unpacking, look for the ADTcc directory.
> > You should be able to use Paul's ADTcc client with ADTPro, provided
> > you can run your card at 9600 baud.
>
> Ok, I've given this a try - still no luck.
>
> I'm able to send the ADTcc.dmp file over and it correctly saves itself.
>
> After BRUNing it I use the CONFIGURE option to match comms parameters.
> However, back on the main screen in the top left it still sys 'SSC:S2,00
> 30' whic, to me, say it still thinks it's an SSC card.
It still says SSC, but it's not, really.  The only things that really
change in that version is the hardware addresses that get poked and
prodded to manipulate the card.  In the config screen, you should see
"CC SLOT" and "HI SPEED" instead of "SSC SLOT" and "SSC SPEED".
That'll tell you that you're running the comms card version.