Re: Missing rainbow ribbon on SSC card and need help where pins are, please!

["Bill Garber" <willy46pa@comcast.net>]

"jagginess" <jagginess@yahoo.ca> wrote in message
1155605191.509769.275750@i42g2000cwa.googlegroups.com">news:1155605191.509769.275750@i42g2000cwa.googlegroups.com...
: Thanks Bill. I'm assuming that pin 1 is on the right column when
: viewing the back of the board (whilst the golden fingers pointing down
: of course), is this correct? I have the apple serial card manual, but
: there's no mentioning if pin 1 is on the right or left column as on the
: board, I know its on the top as the board has a print on it.

Looking at the front of the board, switches to the left,
card edge down, the pins are as follows:

    1 o  o 2
    3 o  o 4
    5 o  o 6
    7 o  o 8
    9 o  o 10

This creates the same effect as looking into the connector
from the end of the board that points to the back of the
machine when installed into the slot.

Similarly on the 9-pin port you would have this:


            1  2  3  4  5
          _________________
          \ o  o  o  o  o /
           \  o  o  o  o /
            -------------
              6  7  8  9

I hope this helps with your cable finding, making, or whatever
you decide to do. Good Luck, and I'm here if you need more help.

Bill