Re: IW Cutsheet Feeder Help?

[CUTblakeney@home.com (Jeff Blakeney)]

On Mon, 13 Dec 1999 10:38:56 -0500, John Townsend
<utownje@lexis-nexis.com> wrote:

>From your description, I would guess that the two rubber pickup rollers in the rear
>bin have lost their grip, due to hardening with age, and are slipping on the
>paper.

There was a thread about this in the A2 forum on Delphi a while back
and there were a few methods posted to fix the pickup rollers on
ImageWriter II sheet feeders so that they would pick up paper properly
again.

The messages are in a thread called "ImageWriter II parts ??" in the
"Free Trade Zone" topic.  If you telnet in, you can start reading at
message 26486 for the first message about fixing the rollers.  If you
use the web side you want to go to this URL:

   http://forums.delphi.com/apple2/messages/?msg=2339.18&ctx=1

Keep in mind that some of the messages in that thread don't pertain to
fixing ImageWriter II sheet feeders and there are 58 messages total in
that thread and you'll be starting at the 18th one.  The really good
messages actually start at message 25.

+------------------------------------------------------------------------+
| Jeff Blakeney - Dean of the Apple II University in A2Pro on Delphi     |
|                    Delphi Apple II Forums Web Pages                    |
| A2: http://www.delphi.com/apple2   A2Pro: http://www.delphi.com/a2pro  |
+------------------------------------------------------------------------+