GBBS Question

["Joel Ostroski" <junkmail@youlazybum.com>]

Well I am on my way to making my modem emulator.  The only problem that I
have is with GBBS.  I have my IIgs hooked up to my PC with a null modem
cable.  I know it works as I have transferred many a disk over to the IIgs.
My question is the configuration of GBBS.

I see in the configuration screens that first you select your interface type
(internal/external). I select external.  Then the interface type (Super
Serial, etc...). I select IIc and that is the closest one that makes sense
to me.  Then I have to select the modem type.  I see in the list there is a
IIgs modem port 2400bps.  I select that.

Now on the PC side I am using a terminal program to see when GBBS sends the
initialization strings to the "modem".  I am expecting to see some AT
commands come across.  At that point I would respond to them with my modem
emulator software that I am writing.  But GBBS just sits there locked up.  I
do not get the changing character status in the upper right hand of the
screen.  Of course it does work when I run GBBS is local mode :-).

So, the Question:

What modem configuration selections would you make?  Are the ones that I am
using wrong? What would you guys suggest?

I have try a few different selections with no succuess.  I could step
through them all one at a time but there are a  lot of combinations there!

Thanks for all your time!