Re: PC -> Apple //e transfer

[Zerblinitzky <randrews@pdq.net>]

> You don't use the PC to do it.  You use the IIe to do it.
> I've done it before via a PC Transporter hardware/software
> IBM PC emulator that runs on the Apple IIGS.  Use PCT
> to transfer disk images over, then run the DSK2FILE
> program on the Apple II side to extract the image to disk.
> It was only for novelty, though, since I no longer have
> a 5.25 drive, I stopped using those old disk image based
> stuff a long time ago.  I run mostly 16-bit IIGS native
> stuff now.
>
> Too bad.  If I DID still use those old stuff, it'll be a cinch
> to transfer now that I have a Zip drive on my IIGS!

Hrm. I'd do that, sounds easy, except for one little thing: I have no disks
to boot it with, how would I get the emulator on the //e? Reading the FAQ
(Which also said it couldn't be done, but I choose not to believe that until
I have beaten my head against the problem for a few months) I saw something
about null-modem connections. Any ideas, could I do that without any software
on the //e side?