[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Monitor Problems
Paul Grammens wrote in message <36F0AEF4.5AF7@sonic.net>...
>Charles J. Sarchet wrote:
>>
>> If anyone knows how to diagnose and repair the GS RGB Monitor, I would
>> greatly
>> appreciate some help. I have one that beyond my limited knowledge to
fix.
>
>I'm an electronic tech, and I've worked on lots of monitors, though not
>a IIgs RGB. Post some detail on the nature of the problem, and maybe I
>can point you in the right direction. Worst case, they sell for $5 or
>$10 around here, once people realize they don't work with a Mac.
>
>The problems usually relate to horizontal, vertical, red, green, blue,
>focus, intensity, stuff like that. So what are the symptoms?
>-Paul
Here is what I can tell you. I have the case torn apart and reconnected
everything that had to be disconnected to get the case apart. I turn the
monitor on and the power light comes on, but there is no picture.
Observation of the picture tube shows only a slight glow. I would normally
expect this to be brighter then what I am seeing which leads me to believe
that it is some sort of power problem. Typically in my limited experience
with televisions, this would more than likely indicate a problem with the
high voltage power supply. I also found that there were a couple of burn
marks on the leads to a couple of resistors, but they metered out fine.
I received this unit along with the rest of a GS that had an incident with a
power spike. The spike fragged the surge protector and the power supply in
the GS. The power supply appears to have had a slight fire and darkened the
inside of the GS and the monitor. There appears to be no smoke damage after
I cleaned everything with some alcohol. The GS is back on line after some
cleaning and a swap out of the power supply, but the monitor is having the
described problem.
The power supply in my O-Scope is toast and finding parts for a 1967
Techtronix is harder then walking on water. So, I can't do anything more
than put a meter on it until I can afford to get a new scope.
If you can get the monitors for $10 in your area, I would be real interested
in getting a couple of spares.
Thanks,
Chuck :-)