Re: Apple ][ "power light" specs

[spec@vax2.concordia.ca (Mitchell Spector)]

In article spec@vax2.concordia.ca (Mitchell Spector) writes...

>    You need a mini lamp with two pin connector. From what I recall, 
>the Apple II uses a 5 volt, 115 milliamp bulb (the bulb itself is
>is roughly 0.6mm tall, so you would want to find one of around that
             ^
    Oops, I of course meant 6mm tall, the above would be an almost
microscopic bulb. ;) The entire lamp from top to bottom (including
pins and plastic base) is just under 1 inch tall. When I used a 
LED as a replacement, I had to cut the pins so there was enough
clearance for it to fit. Generally a LED won't be as bright as the
mini lamp however, I especially noticed that in my Apple IIe.

Mitchell Spector
spec@vax2.concordia.ca