Re: zipgs

[gsanchez@netvoyage.net (Gabe Sanchez)]

On Sat, 28 Sep 1996 02:03:47 -0800, JB <jbcole@ix.netcom.com> wrote:

>figured out how to use it.
>Now how do I replace the 65816 with the 14mhz one I got from WDC?

Just keep in mind that just because you replace the processor, it does not mean
it will automatically run at 14Mhz, you need more modifications to the zip board
it self in order to get it to run at 14Mhz.  For one you will need a faster
crystal occilator.  Take a look at the zip FAQ for more details

>I don't know how to take it out.
There is a little chip puller that you can purchase, Aguat makes them and it
makes taking these chips out much simpler.  You can also use a small screwdriver
and pri (sp) the chip out but be very carefull for you can damage your chip.

>By the way my zip says it is version 1.0.2. @ 8mhz.

This is the version that I am using on my GS so it is the current version.

--
Gabe Sanchez
Coordinator of Technology, Pius-X St. Matthias High School

email   : gsanchez@sure.net
Web Page: http://www.sure.net/~gsanchez/

"Real funny scotty now beam down my clothes"