Re: Decreased stability with Second Sight?

[gachot@carros.enet.dec.com ()]

|>: 	This manipulation didn't help. 
|>: 	Somebody told me: One thing that cleaned up my SVGA output 
|>: 	A LOT was to GROUND the svga connector casing to the gs case 
|>: 	or some other ground.. 
|>: 	But for me, I still have the problem.
|>
|>: 	I notice that the 'TWGS green light' is blinking at the
|>: 	same cadence as the monitor is flickering !!!. There is
|>: 	perhaps interferences between the TWGS and the SS ?.
|>
|>  Well, that's very strange.. what happens if you remove the TWGS,
|>or slow it down? How close is the TWGS to the Second Sight (what
|>slots are they in?)

	I think that I found the problem, as I enter in a previous
	note. I'm living not far from an Eletric-Line. My IIgs is
	installed at the first floor of our house, and is oriented
	to this Line.

	When I bring down the computer, the flickering screen seems 
	to disappear.

	For Info the TWGS is very closed to the SS as 

		SS -> Slot 3
		TWGS -> Slot 4

	For the test without the TWGS, I will do it and let you know.

		-Erik