[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Shiva FastPath Help?
In article
<ec824ecd-4a2e-4369-9588-4d563487359e@m7g2000prd.googlegroups.com>,
pitz <pitz.wong@gmail.com> wrote:
> I also seem to recall from years back that I could not get the
> Asante boxes working.
FWIW, I finally got an AsantéTalk to work by slavishly following the
power-up sequence prescribed in the FAQ:
"Q: Is there an approved power-up sequence for the AsantéTalk?
"A: Yes. In general, turn on all Localtalk devices first: printers,
laptops and desktop computers. Once these are all functioning, do
EITHER of the following: If the AsantéTalk will be connected to an
existing Ethernet network, connect the silver Ethernet cable to a hub,
bridge or router, and power up the AsantéTalk. If the AsantéTalk will
be connected to an iMac, connect the yellow crossover cable to both
AsantéTalk and iMac, power up the AsantéTalk, THEN power up the iMac.
<http://www.asante.com/products/CardsAdapters/AsanteTalk.asp>
Yes, this is required every time the power goes out. :-)
--
John B. Matthews
trashgod at gmail dot com
<http://sites.google.com/site/drjohnbmatthews>