On Jun 22, 6:13 pm, Steven Lichter <diespamm...@ikillspammers.com>
wrote:
PZ wrote:
Water. Or water with some dishwashing soap, provided that you rinse
well so not to leave any residue. Use a fingernail brush and make
sure the card dries off completely before you turn it on. Anything
without a transformer on it will be fine. I've cleaned up //e and GS
mobos with the spray nozzle from my garden hose. Do a light towel dry
to remove drops and hit it with a hair dryer for a minute taking care
not to overheat the board. Then leave the card out in the sun for a
day or over a register vent (ac or heat) to let any moisture remaining
underneath IC's to evaporate.
- Paul
I was thinking about a compound that we used to clean cards for
Telephone Switching Centers; those cards range up to $25,000 so you have
to be careful. I'm looking through some of my old operations manuals to
see if I can find out what it is called; I know it worked very fast
and did not damage anything on the card. I do remeber it was made by or
for Western Electric, but you could find most of those products at other
places; one that comes to mind is GrayBar Electric, which you can find
in any large city and on the Web, their prices can be steep unless you
have a working account from them/
--
The Only Good Spammer is a Dead one!! Have you hunted one down today?
(c) 2009 I Kill Spammers, Inc. A Rot In Hell Co.
Hey, I've got a Greybar account, do you remember what the product
would be I would order from them?