Re: WTD: Transwarp GS ribbon cable. Improvements?

["Bill Garber" <willy46pa@comcast.net>]

"RichardK-PB" <atari@NOSPAMbtconnect.com> wrote in message
36v3pbF5436j7U1@individual.net">news:36v3pbF5436j7U1@individual.net...
: Sean Fahey wrote:
:
: > Richard, if you're going to go to the trouble of replacing the power
supply,
: > consider just making it external, ala "Buggie" style. Any power supply,
fan
: > or not, just adds heat to inside of the case. Some of the newer clone PC
: > power supplies aren't as butt ugly as they used to be, but still it's
: > something extra on the desk...
:
: I'm considering that route - just thinking aloud, mostly ;)
:
: I do want my case unmodified, though - I like the way the IIgs looks,
: that's a big part of having it.
:
: I solved part of my crashing problem at least. The 4Mb card's SIMMs aim
: out of the case, right? Well - when I've had the lid on, the shielding
: was pushing the card at an angle, and a bad contact had formed.

Hope it's not a RAM-4-GS. I made sure my simms did not
hit the shielding. If it is, then your shielding is bent in too far,
or something is pushing the ram card over. Sitting in the slot
on an angle will also cause poor contact. Be sure the ram card
is sitting straight up in the socket at all times.

Apple II Forever, Apple II Together
Bill @ GarberStreet Enterprizez
Web Site - http://garberstreet.netfirms.com
Email - willy46pa@comcast.net