Re: WaZaBoo! May be down for a while

[dj_lx1@earthlink.net (dj_lx)]

dj_lx1@earthlink.net (dj_lx) wrote in message news:<8a6c6b9f.0312261357.4efef4e2@posting.google.com>...
> "brad" <mrbrad@ll.net> wrote in message news:<vungif8spn4r19@corp.supernews.com>...
> > i'd recommend www.synchro.net if you want to run a pc based bbs..it is
> > freeware/supported actively (updates every 3months or so..major updates)
> > check it out it is a painless install and he even has a dynamic ip setup for
> > sysops that use this pkg ..even works with a dialup inet accnt
> > 
> > brad
> > former sysop lost-gonzo.com
> > 
> > 
> > "dj_lx" <dj_lx1@earthlink.net> wrote in message
> > 8a6c6b9f.0312251516.6e29966@posting.google.com">news:8a6c6b9f.0312251516.6e29966@posting.google.com...
> > > "Bill Garber" <willy46pa@comcast.net> wrote in message
>  news:<NfednZwT_McssHeiRVn-ug@comcast.com>...
> > > > "dj lx" <dj lx1@earthlink.net> wrote in message
> > > > 8a6c6b9f.0312241313.53a2ea60@posting.google.com">news:8a6c6b9f.0312241313.53a2ea60@posting.google.com...
> > > > : I have a problem with the RamFAST V.3.00h.    I unplugged one modem
> > > > : and plugged in another while the GS was still on. Now Everytime I boot
> > > > : the GS the hard drive spins with the little light on and Ram FAST
> > > > : tries to scan the hard drive but the little light spins too. I have
> > > > : tried pressing "0" for the RamFAST menu and then scan for the hard
> > > > : drive but that doesn't work, either. I have tried taking out the
> > > > : RamFAST card and booting that way then replacing the RamFAST card with
> > > > : no luck either. Does anyone know how to fix this?
> > > > :
> > > > : Alexey
> > > >
> > > > There is no way to be sure, but I doubt that
> > > > unplugging a serial cable would have an effect
> > > > on the operation of the SCSI card. Did you check
> > > > to be sure that your battery didn't die and make
> > > > the slots revert to default status? I had a RamFast
> > > > SCSI with 3.00H ROM and I sold it because I couldn't
> > > > get it to work right in my ROM-3 IIgs. I recently
> > > > picked up a High Speed SCSI card, but haven't used
> > > > it as yet. I'm still trying to get reorganized here.
> > > > Anyway, try resetting your control panel to default,
> > > > running the system, and then only install the SCSI
> > > > card and drive. Then if all is well there, begin
> > > > to install the rest of your system. Can't think
> > > > of anything else to do.
> > > >
> > > > Bill @ GarberStreet Enterprizez };-)
> > > > Web Site - http://garberstreet.netfirms.com
> > > > Email - willy4SPAM6pa@comXcast.net
> > > > Remove - SPAM and X to contact me
> > > >
> > > >
> > > >
> > > > ---
> > > > This email ain't infected, dude!
> > > >
> > > > Checked by AVG anti-virus system (http://www.grisoft.com).
> > > > Version: 6.0.544 / Virus Database: 338 - Release Date: 11/25/03
> > >
> > >
> > >
> > > NO the control panel is normal, slot 7 for "Your card" and everything
> > > else is ok. The battery didn't die, I think. I did try ProSEL off of a
> > > flopy and got a response that said "Unable to load ProDOS. When I
> > > first got the GS out of the attic it was cold and did the same thing,
> > > drive spinning and extra light on. Then after about 20 tries it
> > > booted. I am looking into IBM PC BBS's maybe I can get that to work.
> > > My boss at work is buying me a new computer, probobly with speakers,
> > > and a fast one, I own music software so I can make music. I will use
> > > the old comp0uter to run a PC BBS, if I can't get the GS to work.
> > >
> > > Alexey
> 
> 
> 
> Ok, I have Syncronet installed but I don't see a toggle to set up the
> modem. It says...waiting for a call, but doesn't answer, any hints???
> 
> Alexey




Forget that last part. I found the version of Synchronet that supports
modems. But I can't get the modem to init. I have a choice of UART, PC
Bios, PS/2 Bios, or Digiboard. Can't figure it out. I am really upset
that my GS is on the fritz.

Alexey