Re: Apple IIgs booting/monitor problems

["Gabriel Androczky" <p0531d0n@freemail.hu>]

Well, mine has 120V printed on the rear :-((

Has anybody any knowledge on this subject??
Is there a way to change this part in the monitor?

If yes, has anybody got such a dead 220V-240V monitor with this part
possibly ok and is willing to send the part only??

I am clueless.

Thanks,

Gabriel


"Michael J. Mahon" <mjmahon@aol.com> az al�bbiakat �rta a k�vetkezo
�zenetben 20031007022354.25695.00000581@mb-m05.aol.com">news:20031007022354.25695.00000581@mb-m05.aol.com...
>
> I believe that the intent of the product spec is to state that the monitor
> is _available_ in three voltage ranges, but any particular monitor is
> only wired for the voltage on its label in the rear.
>
> Although this might suggest that the power supply could be
> adapted easily to 220VAC, there is no guarantee--there may
> simply have been two (or three) different power supplies to go
> with the different label voltages.
>
> Someone who has looked inside recently would be able to
> tell if at least some of them had a mains voltage jumper...
>
> -michael
>
> Check out amazing quality sound for 8-bit Apples on my
> Home page:  http://members.aol.com/MJMahon/