Re: Transwarp conflicting with Vulcan HD in 2e?

[waynes@telus.net (Wayne Stewart)]

Hal  wrote 
 
> Transwarp is ROM v.1.3. How do I run a self-test? Could you tell me what 
> your dip switch settings are?


You can run the self test by holding down the 9 or 0 when you power up.
I'm using v1.4 with the 16 bit option.

The IIe with the Vulcan and Transwarp are in storage so it's hard to check.
 I'm using a IIe with a TransWarp and Ramfast now. 

I remember now that I did have a problem with the TransWarp and Vulcan 
combo when I first got the Vulcan. Tha solution to it was to put the 
Transwarp in slot 7 and put the Vulcan controller in a lower slot. Then 
set the Vulcan to Psueso-slot to slot 7. To do this set the Vulcans switch 4 
to open.
Funny how I forgot about that considering how many hours I spent coming
up with the solution. Then the first Apple II savvy person I mentioned it to 
said" Oh yeah, that's what AE used to recomend". I let him live :-)

If I've forgotten something and that doesn't work let me know and I'll
dig out that IIe.

Wayne