[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: DMA at 2.8 MHz?

Subject: Re: DMA at 2.8 MHz?
From: glynnet@zero.cypher.com (Glynne Tolar)
Date: Thu, 20 May 1993 19:27:57 GMT
Newsgroups: comp.sys.apple2
Organization: Cypher Technologies
References: <1993May14.120834.14292@actrix.gen.nz> <1993May18.122045.9632@desire.wright.edu> <1993May19.222220.28516@fawlty.towers.oz.au>
Sender: usenet@nuchat.sccsi.com (Netnews Administrator)

In article <1993May19.222220.28516@fawlty.towers.oz.au> johnmac@fawlty.towers.oz.au (John MacLean) writes:

>OK, any chance of a special version of the RAMFast for IIGS owners with
>a ZIPGS that goes via the ZIPGS expansion slot?
>I realise this is a very limited market, but it would be great!

Not to mention that many of the ZipGS do not even have a socket where the
"expansion" connector is located.

-- 
Glynne Tolar                                      glynnet@zero.cypher.com
                                               or GEnie: G.TOLAR

References:
- Re: DMA at 2.8 MHz?
  - From: dempson@swell.actrix.gen.nz (David Empson)
- Re: DMA at 2.8 MHz?
  - From: avogan@desire.wright.edu
- Re: DMA at 2.8 MHz?
  - From: johnmac@fawlty.towers.oz.au (John MacLean)

Prev by Date: Re: SCSI Y-cable
Next by Date: RamFAST SCSI Question
Previous by thread: Re: DMA at 2.8 MHz?
Next by thread: IIc drive problems....
Index(es):
- Date
- Thread