Re: Is my RAMFast Rev C card dead?

[stockhunt9@gmail.com]

On Jun 6, 4:33 am, "Bill Garber" <willy4...@comcast.net> wrote:
> <aiiad...@gmail.com> wrote in message45750a0e-5991-49dc-ab17-5745c1131437@p25g2000pri.googlegroups.com">news:45750a0e-5991-49dc-ab17-5745c1131437@p25g2000pri.googlegroups.com...
>
> On Jun 5, 12:41 pm, Lockar <loc...@nowheretobefound.com> wrote:
>
> > I removed all cards and it booted fine, I then put the cards back
> > in and it booted fine. However when I go back into the ROM it still
> > says there is a configuration error. So I look into into the settings,
> > it still set up to work with a Transwarp GS. I turn it off, quit or
> > save it hangs until I reboot, (Note I have no drive connected to the
> > card)
>
> : prolly need a drive connected....
> :
> : try this too:  coat gold fingers of ramfast with rubbing alcohol,
> : plug into slot... remove.  plug in, remove..  this will clean the
> : MB slot connector if it's dirty...
> :
> : I dunno where settings are stored on RAMFAST... in BRAM
> : on the GS MB?  I don't think so...  but maybe?  or perhaps
> : on a drive that is connected to it?
> :
> : Rich
>
> Also, he may like to go here, and have a good read.
> Links to the RamFAST manual are available in section 023.
>
> http://home.swbell.net/rubywand/Csa2HDNSCSI.html
>
> Bill Garber from GS-Electronicshttp://www.garberstreet.com

Check out Stockhunt.com, turn $150 into $1,000,000.
It works for Jim Cramer why wont it work for.
Sign up now!
http://www.stockhunt.com/news-letter.aspx