Re: Request for Product - mousetrap?

["Bill Garber" <willy46pa@comcast.net>]

"brad" <mrbrad(remove)@ll.net> wrote in message
11dbq339kfimifd@corp.supernews.com">news:11dbq339kfimifd@corp.supernews.com...
:
: "Ed Eastman" <noone@nowhere.net> wrote in message
: news:db349s$oi4$2@unlnews.unl.edu...
: > brad wrote:
: > > anyway..i ran mine thru the vent on side and
: > > attached it (along with a sound switch) on my upgraded apple //e to gs
: > > motherboard setup ..it is switchable off the system saver on the
: side..nice
: > > place to put a sound switch this switch etc
: >
: > Got pics?  I like to see mods made by other A2ers...
: >
: > Thankx,
: > Ed
:
: i'll try to get a pic someplace..essentially it is what bill g. is making
: now with wire and switch
: with both old and new ROMs on 1 chip...the eprom on a switch from old
video
: ROM to new
: mousetext version switchable...
:
:
: the mousetrap //e i have ...is gonna be hard to tell...i THINK it is
exactly
: the same as what
: bill g. is doing...but my commercial (kinda/sorta) product looks like a
: solid plastic black lego
: block (think 2001 a space odessy) with a wire and radio shack  micro
toggle
: switch at the end of it)
: the chip it self looks like (before it had this case put around it) put
into
: a standard removeable
: DIP solid pin arrangement for ease of taking in and out (kinda like the
: clockchip end on a //e ver)
:
: but because it is essentially encased (which means it is prob impossible
to
: break a pin out of it inside where switch
: wire is attached..
: or for the wires soldered to the eprom legs to move etc etc) it looks
: essentially indestructable..actually
: if bill g. were to make a mess of these comercially it looks like a good
: idea...make the eprom fix
: add wires w/switch end...transport back to the old High School Plastics
shop
: class...and then pour
: Clear acrylic fast setting plastic into mold for such purpose with
: everything in place...viola..indestructable...
: take it out of the apple //e occasionally drag it around the floor for the
: cat to chase and pound on it...ut it back in...
: just another chunk of solid plastic...
:
: mine is black ..would look pretty cool as a clear little transparent block
: plug'd into your //e with a
: switch...(very mysterious...)
:
: and of course be tough to break...(prob easy to melt however)

Before anyone gets the wrong idea, please go to my web site
and look at my Dual Video ROM card. You can make new ROMs
and insert them into the card any time. These are not sealed
so removing the eprom and reinserting another one is easy.
Once inserted in the socket there is no reason to remove it,
and you can plug the original rom into the back 24 pins of
the socket in the card and just have one ROM. Please have a
look at it so there will be no confusion.

Thanks,

Apple II Forever, Apple II Together
Bill @ GarberStreet Enterprizez
---------------------------------------------
Web Site - http://garberstreet.netfirms.com
HOME OF THE RAM-4-GS
---------------------------------------------
Email - willy46pa@comcast.net
---------------------------------------------